1, design groove before please read each series of product description, it is clear that the product uses the whole groove or the split groove, the process of installing the seals should pay attention to avoid the Lingrui side, the hole seals into the whole groove with the help of installation tools; The designer must consider the Groove dimension precision, surface roughness, extrusion clearance and other parameters, please refer to the product use instructions, illustrations and size table.
2, the installation of seals must ensure that there is no impurities and cracks in the seal trench, respectively, in the sealing groove and seal surface coating operation oil, in order to gradually install seals, installation process to avoid Lingrui side, Fuzheng seals, to avoid distortion and skew, if the split groove, the final tightening gland.
- What Is A Sealing Piece
- Development Of Sealing Parts
- Classification Of Use Of Sealing Parts
- Storage Of Sealed Parts
- The General Knowledge Of The Sealing Parts Purc...
- Key Points Of Use Of Sealing Parts
- Factors Affecting The Sealing Parts
- Common Name Of Seals
- The Industry Status Of Sealing Parts
- Precautions When Installing Mechanical Seals
- The Performance Of Mechanical Seal Material Is ...
- Four Characteristics Of Cavitation Corrosion In...
- Notes For Installation And Use Of Mechanical Seal
- How To Ensure Mechanical Seal Equipment Quality
- The Principle And Advantages Of Outer Packing B...
- Selection Of Mechanical Seal Design
- Mechanical Seal Overview