1. In the removal of mechanical seals to be careful, strictly prohibit the use of hammer and flat shovel, so as not to damage the sealing elements. Can do a pair of wire hooks, in the direction of self-financing into the drive seat gap, the sealing device pull out. If the scaling is not removed, should be cleaned and then removed.
2. If at both ends of the pump with mechanical seals, in the assembly, demolition process to take care of each other, to prevent the other.
3. For the operation of mechanical seals, where the gland is loose to seal the movement of the situation, the static and dynamic ring parts must be replaced, should not be tightened to continue to use.
Next: No Information
Related Industry Knowledge
- Normal operation and maintenance of mechanical ...
- Notice of selecting mechanical seals
- Mechanical seals follow and use technical requi...
- Use and maintenance of mechanical seals
- Mechanical seal installation should generally f...
- Auxiliary Equipment and sealing systems
- Analysis of leakage causes of mechanical seals ...
- Maintenance of mechanical seals for pumps
- The advantages of mechanical seals
- Cause of seal failure